Accessing the ASMI using a PC or notebook and web browser
https://www.ibm.com/support/knowledgecenter/8408-E8E/p8hby/browser.htm
If your system is not managed by a Hardware Management Console (HMC), you can connect a PC or notebook to the server to access the Advanced System Management Interface (ASMI). You need to configure the Web browser address on the PC or notebook to match the manufacturing default address on the server.
The Web interface to the ASMI is available during all phases of system operation including the initial program load (IPL) and run time. The ASMI is used to perform general and administrator-level service tasks. These tasks include reading service processor error logs, reading vital product data, setting up the service processor, and controlling the system power.
The following instructions apply to systems that are not connected to an HMC. If you are managing the server using an HMC, you access the ASMI using the HMC.
Zobacz całośćhttps://www-01.ibm.com/support/docview.wss?uid=isg3T1010983
If my managed system isn't yet attached to an HMC, how can I use the operator panel to get the addresses for the FSP of my managed systems?
To get the service processor IP address and port location from the operator panel, you must first switch to manual mode (using function 02) and then use function 30 to get the FSP addresses.
Here is what the operator control panel on most p5 systems and the 9117-MMA will look like: